state of the art electronics and high-grade FETs provide supremely low noise.provides significantly improved level to your mic preamp for proper gain staging.gain stays consistent regardless of connected load.
the perfect way to boost the signal of a passive microphone. designed for neutral, balanced sound quality. +28dB OF CLEAN, CONSISTENT GAIN, INDEPENDENT OF LOAD Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards. Its output impendence is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz and hum. Whether you’re a podcaster, recording engineer, or running live sound, the DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp – all without adding noise or coloration. Additionally, the gain it provides is always a consistent +28dB regardless of the connected load, thanks to its dedicated buffer amplifier. With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones – perfect for podcasting, recording, or live sound. Some mics need a LOT of gain – and not all preamps are up to the challenge. The DM1 DYNAMITE: explosive level for all your passive mics. While you can connect a microphone to the DM1 using an XLR cable, shorter cables will result in better performance.SE Electronics DM1 Dynamite Ultra-slim active inline preamp The DM1 features a rugged, roadworthy, all-metal design with top-of-the-line manufacturing standards, providing rock-solid reliability demanding on-stage applications or in difficult environments.įor best results, it is recommended that you plug the DM1 directly into the output of your microphone. ROAD-WORTHY RELIABILITYįeaturing the lowest output impedance in its class, the DM1 can drive long cable runs without RF interference, buzz and hum-allowing you to run lines from the stage to FOH or to far-off iso-booths in the studio. Equipped with dedicated output buffer amplifier, the DM1 consistently delivers +28 dB of gain, regardless of the connection load. With a cutting-edge, Class A design and hand-selected high-quality FETs, the DM1 offers minimal self-noise. 
The DM1 is the perfect way to boost the signal from a passive mic. But trying to capture quiet performances often results in weak, noisy signals - until now. Sometimes a record calls for the dark, smokey tones of a vintage ribbon mic, or the punchy midrange of a dynamic mic. THE PERFECT COMPANION FOR PASSIVE MICSįor decades, condenser microphones have been the go-to choice for recording intimate performances, however they don’t always provide the desired color and character. Simply insert the DM1 between your microphone and preamp to boost the signal from passive mics without adding noise or coloration. The sE Electronics DM1 Dynamite is an active inline preamp designed to provide +28 dB of gain for ribbon or dynamic microphones. Digital Adapters & Miscellaneous Cables.
0 kommentar(er)
